Contents 3 Sections
NC 13 is a heavy-duty cleaner that thoroughly cleans dirty wheels, car paint and upholstered seats. Combined with our Nobel Pad, it also thoroughly removes tar spots and even the smallest rust spots.
Simply spray on NC 13, let it work for 10 seconds (or longer) and then wipe off the dirt in one direction with a damp microfiber cloth. Then rinse the cloth in a bucket of warm water. After that, clean the next area and rinse again. The microfiber cloth releases the dirt when you rinse it, so you can use it again and again. Alternatively: spray generously and then rinse off with a pressure washer.
Alloy wheels
Spray dirty wheels evenly with NC 13 and rinse and clean them with our hydro sponge and warm water.
The surface is then clean, and you should now finish it with NC 1. Spray on NC 1 and buff with a dry microfiber cloth.
Car paint
Spray on NC 13, then rinse off with a pressure washer. Then spray on NC 1 and buff with a dry microfiber cloth. Please don't press down when buffing. That could cause surface scratches. Just buff lightly until dry. If the cloth gets damp, swap it for a dry one. Otherwise you'll get damp streaks on the paint.
Car seats (upholstery)
Spray the car seat generously with NC 13, take a washing-up brush or a good microfiber cloth (at least 350 g) and scrub the surface thoroughly with the brush.
With the microfiber cloth: here, too, spray the seat and clean the surface thoroughly with a damp microfiber cloth. We professionals fold the cloth after each pass and use a fresh side to remove the dirt as quickly as possible. Once the cloth is dirty all over: rinse it out, wring it out and carry on.
Once the upholstery has been cleaned thoroughly, everything has to dry properly first. Otherwise you'll end up with a wet backside.
Our cleaners are biodegradable. Even so, they do contain chemicals, so please keep the cleaner away from children and store it securely.
Featured in this article
What you'll need
Share post
